Soot, smoke, and wiring damage handled by certified restoration techs

Electrical Fire Cleanup in LAKE WORTH BEACH, Florida

Electrical Fire Cleanup in LAKE WORTH BEACH, Florida starts with a thermal scan of the panel, outlets, and attic runs, then moves to soot removal, odor neutralization, and structural drying. We handle residential and commercial losses, work directly with your insurance adjuster, and document every step. If the fire is out but the smell and residue are not, call us at (833) 929-6186 and we will be on-site the same day.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration Lake Worth Beach — your local Fire Damage Restoration team
Careful work. Honest options.
About this service

What Electrical Fire Cleanup in LAKE WORTH BEACH, Florida Involves

Electrical Fire Cleanup in LAKE WORTH BEACH, Florida is the process of removing soot, char, smoke residue, and contaminated materials left behind after a wiring, panel, or outlet fire, then drying and deodorizing the structure so it can be safely reoccupied. It is not the same as a general house cleaning. Electrical fires burn hot and fast, and they leave behind fine carbon residue that settles into insulation, HVAC ducts, and wall cavities. Our technicians use a thermal imaging camera to find hidden hot spots and a moisture meter to catch water damage from firefighting before it turns into mold.

Most electrical fires in this area start at the panel, an overloaded outlet, or aging knob-and-tube wiring in older homes. When you search for electrical fire damage repair near me LAKE WORTH BEACH, you need a crew that understands both the fire damage and the electrical system that caused it. We coordinate with a licensed electrician to isolate and repair the failed circuit before restoration begins, so the building is safe to work in. That sequencing matters, and it is why we ask about the panel and the breaker history on the first call.

  • ✓ Stop Corrosion Early
  • ✓ Clear the Air You Breathe
  • ✓ Protect Your Insurance Claim
  • ✓ Restore Instead of Replace
What's included

What Electrical Fire Cleanup Includes

Our standard electrical fire cleanup scope covers inspection, soot and smoke removal, deodorization, and drying. Structural repairs and electrical work are handled by licensed trade partners and quoted separately after the inspection, so you always know which line item is which.

✓

Thermal Inspection and Scope

A lead technician maps soot travel and hidden moisture with a thermal imaging camera and moisture meter, then writes a room-by-room scope with photos. You get the document before any work starts.

✓

Soot and Char Removal

Crews HEPA-vacuum surfaces and use dry-chemical sponges on walls and ceilings. Charred drywall, insulation, and lumber are cut out and bagged for disposal, and the site is kept under negative air pressure.

✓

Smoke Odor Treatment

Thermal fogging reaches wall cavities, and hydroxyl or ozone generators run in unoccupied rooms to break down odor molecules. Charcoal odor absorbers stay in place until the final walkthrough.

✓

Structural Drying

If firefighting water soaked framing or subfloor, we set Dri-Eaz or Phoenix Restoration Equipment dehumidifiers and log moisture readings daily until the structure meets dry standard.

✓

HVAC Cleaning

Electrical fires often push smoke through the return system. We clean and seal accessible ductwork and replace HEPA filters so the system does not redistribute residue when it runs.

✓

Insurance Documentation

You receive before-and-after photos, daily drying logs, and a line-item scope formatted for your carrier. We can walk the site with your adjuster if needed.

How it works

Our Electrical Fire Cleanup Process

01

Emergency Response

We take your call 24/7 and ask about the panel, the breaker history, and whether the power is shut off. A crew is dispatched the same day, usually within 2 to 4 hours for emergency calls in the LAKE WORTH BEACH area. On arrival we secure the site, confirm the electrical feed is isolated, and document conditions before anything is moved.

02

Inspection and Scope

A lead technician walks the structure with a thermal imaging camera and moisture meter, mapping soot travel and hidden water from firefighting. We check the HVAC plenum and ductwork for smoke intrusion, since electrical fires often push residue through the return system. You get a written scope with photos and a material list before work begins.

03

Soot and Smoke Removal

Crews HEPA-vacuum ceilings, walls, and framing, then dry-sponge and wet-clean surfaces based on the residue type. Charred drywall, insulation, and lumber are cut out with a drywall saw and pry bar and bagged for disposal. We set negative air machines and air scrubbers with HEPA filters to keep the rest of the home clean while we work.

04

Deodorization and Drying

Smoke odor lingers in cavities and soft goods long after surfaces look clean. We use thermal fogging solution to reach wall cavities, then run hydroxyl generators or an ozone generator in unoccupied spaces. If firefighting water soaked framing or subfloor, we set Dri-Eaz or Phoenix Restoration Equipment dehumidifiers and monitor readings daily until the structure is dry.

05

Final Walkthrough

We do a room-by-room inspection with you, checking odor, surface cleanliness, and moisture readings against our baseline. Any punch-list items are noted and scheduled. You receive a completion packet with before-and-after photos, daily drying logs, and documentation your insurance carrier can use to close the claim.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds hidden hot spots and smoke travel behind walls and in ceilings before crews open anything up.

Moisture Meter

Maps water from firefighting in framing, subfloor, and insulation so drying equipment is placed where it is needed.

HEPA Vacuum and Air Scrubber

Captures fine soot and smoke particles instead of pushing them back into the air. Air scrubbers run continuously during the job.

Hydroxyl Generator and Ozone Generator

Breaks down smoke odor molecules in occupied and unoccupied spaces. Ozone is used only when the space is empty.

Negative Air Machine

Keeps the work area under negative pressure so soot and dust do not migrate into clean rooms.

Dri-Eaz and Phoenix Restoration Equipment Dehumidifiers

Pull moisture out of framing and subfloor after firefighting water so mold does not get a foothold.

Drywall Saw, Pry Bar, and Sledgehammer

Used to cut out charred drywall, insulation, and lumber cleanly so the rebuild starts from solid material.

Real results

Before and after.

Bedroom Outlet Fire in College Park

Before

An outlet fire charred a 4-foot section of drywall, stained the ceiling with soot, and left smoke odor through the second floor. The homeowner had been running a box fan for two days, which spread residue into the hallway.

After

Crews cut out the charred drywall, HEPA-vacuumed all surfaces, thermal-fogged the wall cavities, and ran air scrubbers for 48 hours. Moisture readings confirmed the framing was dry. The room was ready for drywall repair on day four.

Panel Fire in a Downtown Duplex

Before

A failed breaker panel scorched the utility room wall and pushed smoke through both units. Firefighting water soaked the subfloor near the panel, and the tenants had vacated.

After

We isolated the panel, removed charred drywall and lumber, extracted water, and set dehumidifiers for three days. Thermal fogging cleared odor in both units, and moisture readings met dry standard on day four. Both units passed a final walkthrough on day six.

Attic Wiring Fire in a 1960s Home

Before

Attic wiring failed and charred insulation and roof decking over a 6-foot span. Smoke odor filtered down through ceiling fixtures into two bedrooms, and the homeowner was worried the whole attic would need replacement.

After

Crews removed burned insulation and lumber, treated the attic with thermal fogging solution, and cleaned the ceiling fixtures and bedroom surfaces. Moisture readings confirmed no water damage. The attic was ready for new insulation in three days.

Problems we solve

Problems We Solve After an Electrical Fire

The fire is only the first problem. These are the issues we see most often when homeowners call us for electrical fire cleanup near me LAKE WORTH BEACH, and how we handle each one.

Ask a pro →
01

Smoke odor that returns after cleaning

We thermal-fog wall cavities, run hydroxyl generators, and clean the HVAC system so the source is treated, not covered. Charcoal odor absorbers stay in place until the final walkthrough confirms the odor is gone.

↗
02

Hidden water damage from firefighting

Our technicians use moisture meters to map wet areas and set dehumidifiers and air movers the same day. We log readings daily and do not close the job until the structure meets dry standard.

↗
03

Insurance claim disputes over scope

We photograph every affected surface, log moisture readings, and produce a line-item scope in the format adjusters expect. We can walk the site with your adjuster and answer questions directly.

↗
04

Soot staining on walls and ceilings

Crews HEPA-vacuum first, then use dry-chemical sponges and the correct wet-cleaning method for each surface. Surfaces that cannot be cleaned are sealed with an encapsulant and prepped for paint primer.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Applied Structural Drying (ASD)Institute of Inspection, Cleaning and Restoration Certification
✓
OSHA 10 and OSHA 30 Safety TrainingOccupational Safety and Health Administration
✓
Florida General Contractor LicenseFlorida Department of Business and Professional Regulation
✓
EPA Lead-Safe CertifiedU.S. Environmental Protection Agency
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most residential electrical fire cleanups in this area run $1,800 to $9,500 in 2026, depending on square footage affected and how far smoke traveled. A single-room outlet fire with light soot often lands near the low end. A panel fire that pushed smoke through the HVAC system and attic can reach the high end. We provide a written scope before work begins so you know the number up front.

The most common causes we see are overloaded outlets, aging aluminum or knob-and-tube wiring, failed breaker panels, and loose connections behind walls. Older homes near Downtown and Parrot Cove are especially prone because the wiring was not designed for modern electrical loads. A qualified electrician should inspect any panel that has tripped repeatedly or shows scorch marks.

A single-room electrical fire cleanup typically takes 2 to 5 days. Whole-home jobs with attic smoke intrusion and water damage from firefighting can run 2 to 4 weeks, mostly because of drying time. We give you a day-by-day schedule after the inspection and update it if conditions change. Structural repairs, if needed, are scheduled separately.

Most homeowner policies cover electrical fire cleanup and resulting smoke or water damage, though the cause of the fire and your specific policy terms matter. We document the loss with photos, moisture readings, and a line-item scope that carriers accept, and we can speak directly with your adjuster. Call (833) 929-6186 and we will walk you through what your policy likely covers.

Ready when you are

Get Electrical Fire Cleanup in LAKE WORTH BEACH, Florida

Soot and smoke keep damaging your home every hour you wait. Call (833) 929-6186 and a live technician will schedule a same-day inspection, give you a written scope, and start cleanup. We are licensed, insured, and IICRC-certified.

Call Now (833) 929-6186 →
Request an appointment

Call Our LAKE WORTH BEACH Crew

Call (833) 929-6186 any hour of the day. A live dispatcher answers, takes your address, and gives you a real ETA before you hang up. For non-emergency questions or to send photos of the damage, email info@firedamagerestorationlakeworthbeach.com and we will respond the same business day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186