Licensed soot cleanup for homes and businesses across the city

Soot Removal in LAKE WORTH BEACH, Florida done right the first time

Soot Removal in LAKE WORTH BEACH, Florida starts with a fast walkthrough and a clear plan. We pull soot off walls, ceilings, framing and ductwork before it etches into paint or spreads through the HVAC. If you need soot cleanup LAKE WORTH BEACH homeowners trust after a kitchen, attic or electrical fire, our crew is ready 24/7 with HEPA vacuums, air scrubbers and the right chemicals for every surface.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Soot Removal you can count on
Careful work. Honest options.
About this service

What Soot Removal in LAKE WORTH BEACH, Florida involves

Soot Removal in LAKE WORTH BEACH, Florida is the physical cleaning and decontamination of fire residue from a structure, and it is the step that decides whether a fire-damaged home smells clean or keeps stinking six months later. Soot is not just dust. It is acidic carbon, oils and burned material that bonds to drywall, paint, tile and metal. Left alone, it stains within days and corrodes wiring and fixtures. We test the residue type first, then match the cleaning method to the surface.

Most calls we take in this city come after a kitchen grease fire, an electrical short in an older panel, or an attic fire that pushed smoke through the whole house. If you are searching for professional soot cleanup near me LAKE WORTH BEACH, the answer is a crew that understands how coastal humidity locks odor into porous materials. We use thermal imaging cameras and moisture meters to find hidden soot and the water left behind by firefighting before mold has a chance to start.

  • ✓ Stop permanent staining
  • ✓ Clear the air you breathe
  • ✓ Protect the HVAC system
  • ✓ Keep the insurance claim clean
What's included

What our soot removal service includes

Every soot removal job is scoped to the structure, but the core work is consistent. Here is what is included in a standard residential or commercial soot removal, and where add-on services like duct cleaning or structural repair come in.

✓

Full soot inspection

We map soot spread with a thermal imaging camera and moisture meter, including attic chases, HVAC returns and cabinet interiors. You get a written scope listing every affected surface before work starts.

✓

Containment and air scrubbing

Zip walls, negative air machines and HEPA-filtered air scrubbers keep soot from migrating into clean rooms. This protects your family and keeps the cleaning we do from being undone by airborne particles.

✓

Surface cleaning and deodorization

Dry HEPA vacuuming comes first, then surface-matched wet cleaning, then hydroxyl or ozone treatment for odor. Thermal fogging reaches cavities that wiping cannot, so the smell is neutralized at the source.

✓

HVAC and duct cleaning

Smoke coats the blower, coil and ductwork, and the system re-spreads soot every time it runs. We clean or isolate the HVAC as part of the job so the air in your home stays clean after we leave.

✓

Documentation for insurance

Photo logs, moisture readings and a line-item scope formatted for adjuster review. This paperwork is included on every job, not sold as an extra, because it is what gets claims paid.

How it works

How our soot removal process works

01

Emergency assessment

We arrive, walk the structure with you and map the soot spread using a thermal imaging camera and moisture meter. You get a written scope and a price before any equipment comes off the truck. Most assessments take 45 to 90 minutes.

02

Containment and air control

We seal doorways and returns with plastic and zip walls, then set negative air machines and air scrubbers with HEPA filters. This keeps soot from migrating into clean rooms while we work and protects your family from airborne particles during the job.

03

Dry soot removal

Before any liquid touches a surface, we HEPA-vacuum loose soot from ceilings, walls, framing and contents. Skipping this step smears the residue and drives it deeper into drywall. Technicians wear full PPE suits and respirators throughout.

04

Wet cleaning and deodorization

We match chemical cleaners to each surface, from painted drywall to sealed lumber and tile. After cleaning, hydroxyl generators or ozone treatment neutralize embedded odor. Thermal fogging solution reaches cavities that wiping cannot. This stage usually runs one to three days depending on square footage.

05

Final verification and walkthrough

We re-check moisture, confirm odor is gone at the source, and walk the job with you room by room. You get before-and-after photos and a written summary for your insurance file. If anything still reads off on the moisture meter, we stay until it does not.

Tools & methods

Tools and methods we use for soot removal

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

HEPA vacuum

Lifts dry soot from ceilings, walls and framing without smearing it or releasing fine particles back into the air.

Air scrubber with HEPA filters

Scrubs airborne particles in a sealed work zone, dropping particle counts to pre-fire levels during cleaning.

Negative air machine

Keeps the work zone under negative pressure so soot does not migrate into clean rooms.

Thermal imaging camera

Finds hidden soot and moisture inside walls, ceilings and attic chases without opening every surface.

Moisture meter

Confirms firefighting water is fully dried before we close up walls, preventing mold growth.

Hydroxyl generator

Neutralizes smoke odor in occupied spaces safely, without the evacuation required for ozone.

Ozone generator

Treats severe odor in unoccupied spaces after cleaning, breaking down smoke molecules at the source.

Real results

Before and after.

Kitchen grease fire, first floor

Before

A grease fire left a sticky black film on cabinets, ceiling and the adjacent living room walls. The smell was strong throughout the first floor and the HVAC had already started spreading it.

After

After four days of containment, degreasing, HEPA vacuuming and duct cleaning, all surfaces read clean and the odor was neutralized at the source. The homeowner moved back into the first floor the same week.

Attic fire, smoke through the house

Before

A small attic fire pushed smoke through insulation and the HVAC chase, leaving fine soot on rafters and a smoke smell in every bedroom below.

After

We removed contaminated insulation, HEPA-vacuumed the framing, cleaned the ductwork and ran hydroxyl treatment for 48 hours. Air readings returned to normal and the attic odor was gone.

Electrical fire in a rental unit

Before

An electrical short charred a panel and left acidic soot on nearby walls and fixtures in a College Park rental. The tenant was displaced and the landlord needed documentation fast.

After

We cleaned the structure, documented every surface and provided a written scope the adjuster accepted. The unit was cleaned and verified in four days and the tenant moved back in.

Problems we solve

Soot problems we solve for LAKE WORTH BEACH homes

Soot damage is rarely just about what you can see. These are the problems we find most often when we open up a fire-damaged home in this city, and how we handle each one.

Ask a pro →
01

Smoke odor that comes back after cleaning

We locate the source with thermal imaging and moisture readings, then use hydroxyl generators, ozone treatment and thermal fogging to neutralize odor in cavities and soft goods. We do not sign off until the source reads clean.

↗
02

Soot staining on walls and ceilings

We HEPA-vacuum dry soot first, then use chemical sponges and pH-matched cleaners to lift residue without cutting into the paint. When etching has already happened, we tell you upfront and include stain-blocking primer in the scope.

↗
03

Hidden smoke damage in HVAC systems

We isolate or clean the HVAC before cleaning rooms, including the blower, coil and plenum. Ductwork is HEPA-vacuumed and sealed where needed so the system stops re-contaminating the house.

↗
04

Water damage from firefighting efforts

We meter every wet surface, extract standing water and set Dri-Eaz and Phoenix Restoration Equipment air movers and dehumidifiers. Drying is documented daily so mold never gets a foothold.

↗
Proof you can check

Licensed, certified and documented

✓
IICRC Fire and Smoke Restoration Technician (FSRT)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC Water Restoration Technician (WRT)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe CertifiedU.S. Environmental Protection Agency
✓
OSHA 10 and OSHA 30Occupational Safety and Health Administration
✓
Florida Mold-Related Services LicenseFlorida Department of Business and Professional Regulation
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most residential soot removal jobs in this area run $1,200 to $4,500 in 2026, with small single-room cleanups starting around $600 and whole-house jobs with HVAC cleaning reaching $8,000 or more. Square footage, soot type, ceiling height and whether ductwork is affected drive the price. We give you a written range after the walkthrough, before any work begins.

Yes, in most cases. We start with dry HEPA vacuuming, then use chemical sponges and pH-matched cleaners that lift soot without cutting into latex or oil-based paint. The key is timing: soot that has sat more than 72 hours often etches the finish, and those walls need a stain-blocking primer and repaint. We test a small area first and tell you honestly which outcome to expect.

A single room typically takes one to two days. A whole house with attic and HVAC involvement runs three to seven days, and commercial jobs can stretch longer depending on square footage. Drying time after wet cleaning adds another 24 to 48 hours. We give you a day-by-day schedule at the start so you can plan where to stay.

Most Florida homeowner policies cover soot removal as part of a fire claim, including cleaning, deodorization and often temporary housing. We document every affected surface with photos and moisture readings and provide a line-item scope your adjuster can process directly. If your carrier pushes back, we will walk your adjuster through the scope so the covered work is not underpaid.

Ready when you are

Get Soot Removal in LAKE WORTH BEACH, Florida started today

Soot spreads every hour it sits. Call our licensed crew for a same-day assessment, a written scope and a firm price before any work begins. We are available 24/7 for emergency soot cleanup across the city.

Call for service (833) 929-6186 →
Request an appointment

Call Our LAKE WORTH BEACH Crew

Call (833) 929-6186 any hour of the day. A live dispatcher answers, takes your address, and gives you a real ETA before you hang up. For non-emergency questions or to send photos of the damage, email info@firedamagerestorationlakeworthbeach.com and we will respond the same business day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186